Shared posts

23 May 17:33

NASA hands space enthusiasts the keys to a 1970s-era spacecraft

by John Timmer

NASA felt it had gotten its money's worth out of the International Sun-Earth Explorer-3 mission back in the 1980s. Its last scientific mission ended in 1997, and contact was suspended in 1998. But time and a fortuitous orbit mean that ISEE-3 is now catching up with Earth and will make a close pass this summer. When we first noted this story last year, some enthusiasts were suggesting that the probe should be revived and returned to scientific duty, but the perpetually tight budgets at NASA made that outcome unlikely.

Yesterday, NASA announced that it found a solution: it would hand the keys to the probe over to those enthusiasts.

Launched in 1978, the hardware was initially sent to the L1 Lagrange point between the Earth and Sun and was used to study the solar wind. With that mission complete, the International Sun-Earth Explorer-3 was renamed the International Cometary Explorer and was sent into orbit around the Sun, where it passed through the tails of two comets before its mission ended in 1997.

Read 3 remaining paragraphs | Comments

22 May 17:00

Viz to publish new ‘Battle Royale’ graphic novel

by Brigid Alverson

Viz to publish new ‘Battle Royale’ graphic novel

Before there was The Hunger Games, there was Battle Royale, the novel, manga and film about a teenagers subjected to a deadly elimination game. And now there’s more. Viz Media has announced it will publish Battle Royale: Angels’ Border, a new graphic novel by Koushun Takami, author of the original Battle Royale novel. The two-chapter […]
22 May 16:22

These Radio Frequency-Blocking Clothes Will Keep You Off The Grid

by George Dvorsky

These Radio Frequency-Blocking Clothes Will Keep You Off The Grid

When considering the future of fashion, we typically imagine hyper-connected wearable clothing embedded with all the latest widgets. But Japanese designer Kunihiko Morinaga has gone against the grain by releasing a collection of cellphone signal-repellant clothing.

Read more...








22 May 16:10

STL Show & Tell: SNES Controller #3DPrinting #3DThursday

by Noe Ruiz

3D Printed SNES Controller on Thingiverse

Thingiverse user srepmub shared his awesome 3D Printed SNES controller.

Spectacularly useless replica of the wonderful SNES controller/joypad. Electronics and connector not included. Rubbers quickly modeled and not printed/tested. Perhaps these could be made with flexible filament. Looking forward to also replicating the PCB once my printer can mill those.. ;-)

Because retro gaming is best done on original hardware of course, it might be interesting to combine this with a SNES emulator.. Tested for now on a real SNES, and everything works well.

Additionally serves as a nice construction puzzle for kids.. ;-)

Having had a little experience hacking the SNES controller, I’m pretty confident someone will make a sweet bluetooth mod. Using Ninjaflex to create the elastomers is a great idea (bare conductive paint for the contacts?). Etching your own PCB on your Desktop Mill is definitely already happening!

We carry SNES controllers in the shop, but we love the idea of 3D Printing your own!

Download Available on Thingivese.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

22 May 16:09

Dan Snyder attacked by 50 Senators

by Ryan Van Bibber

Half the members of the United States Senate sent Roger Goodell a letter asking the NFL to change the name of the Washington team. But a letter from 50 Senators doesn't mean much anymore.

Roger Goodell got a letter delivered to him this week. He gets lots of letters, thank you notes from AT&T, save the date cards from Jim Irsay, etc. But this one was different. This was an official letter signed by half of the 100 members of the United States Senate, directly addressed to the son of a former Senator from New York, urging the NFL to change the racially charged nickname of Dan Snyder's Washington Redskins.

Sounds like a power move, one that will finally get Goodell and Snyder to listen to reason. It's not, and it won't.

This isn't the first time Senators have pleaded with the NFL to take action on the issue. Harry Reid of Nevada cited the NBA's decision to toss former Clippers owner Donald Sterling over his own racist remarks in a statement earlier this month. Sterling and the NBA led the Senate letter too.

Goodell and the owners reportedly talked about Sterling and responsible ownership barely a day ago at their business meeting in Atlanta. That discussion was a continuation of the league meetings in Orlando last month, about respect and tolerance and improving the overall condition of the NFL workplace. But for all the keynote speeches and panel discussions and old rumors about five-yard penalties for using the N-word, the name of metro DC's professional football team is still an epithet colored by 300 years of genocide, planned and de facto.

But it's the Senate sending this letter, not a group of marginalized citizens living far outside the view of American television consumers. A letter from 50 blue bloods to another should carry a little more weight.

Maria Cantwell of Washington state initiated the letter. Reid endorsed it (both come from states with sizable native populations and dotted with reservations). They got 48 of their Senate colleagues to sign it, all Democrats. Only five Democrats did not sign the letter: Mark Warner and Tim Kaine of Virginia, Joe Manchin of West Virginia, Joe Donnelly of Indiana and Mark Pryor of Arkansas ... red state Senators unwilling to risk re-election.

50 Senators doesn't mean much these days, not when it takes a two-thirds super majority to get ANYTHING done. Letter writing is just about all the Senate has left in its quiver of things to do between fundraising and elections.

The other 50 Senators who didn't sign the letter can just go on ignoring the situation all together. Or, better yet, they can present it as a partisan attack on a silent majority under siege. Worst of all, the rhetoric allows Dan Snyder and the NFL to portray themselves as victims, just some sporting billionaires who want to preserve tradition.

50 Senators from one party want the NFL to change Washington's team nickname. It might as well be 50 guys in Tony Romo jerseys standing outside FedEx Field with cardboard signs.

Letter to Commissioner Goodell on Washington Sports Team

22 May 16:07

Iranians arrested for dancing Happy in Teheran

by René
firehose

via Tadeu

Hassan Rouhani, Präsident des Iran, neulich so: „#Cyberspace should be seen as opportunity: facilitating two-way communication, increasing efficiency & creating jobs.“ Reuters: Time to embrace the Internet, Iran president says.

Dann haben sie die sechs Kids aus dem iranischen Happy-Video (oben) ausspioniert, in betrügerischer Absicht angerufen, festgenommen und live im Fernsehen erniedrigt. Mich macht der Song ja auch eher aggressiv, aber das hier erscheint mir dann doch ‘ne winzige Nummer drüber zu sein. Bastards.

Iranian authorities yesterday arrested the six young men and women who produced the Tehran version of Pharrell Williams’ “Happy,” the song that spawned dozens of video clips from around the world in a moment of musical global connectedness.

The group appeared on state television’s evening news broadcast, grouped in a row facing Tehran Chief of Police Hossein Sajedinia, and confessed to being deceived into appearing in the clip by an unnamed man and woman. Sajedinia advised the young people during the broadcast not to be deceived into appearing in corrupt film productions, and with a smile complimented the swift reaction of his security forces. “These [agents] were able to identify [these young people] within two hours, and within six hours had arrested them all,” he said.

Iran Wire: Authorities Arrest Tehran Young People Who Produced “Happy” Video Clip (via Blogrebellen)

NYTimes: Young Iranians Arrested for Being Too ‘Happy in Tehran’

22 May 16:07

ooh getcha freak on, ooh getcha freak onEberhard Kieser, Icones...



ooh getcha freak on, ooh getcha freak on
Eberhard Kieser, Icones Mortis Sexaginta Imaginibus, 1648

22 May 16:05

Eberhard Kieser, Icones Mortis Sexaginta Imaginibus, 1648

firehose

better than most RPG book illustrations of such events



Eberhard Kieser, Icones Mortis Sexaginta Imaginibus, 1648

22 May 16:04

[X-POST FROM TIL] During a pledge drive, a DJ at a Portland, OR radio station promised that the station would never play "Stairway to Heaven" again if someone made a $10,000 donation. Robert Plant was driving on the Oregon coast, heard the offer, and made the donation

firehose

KBOO

22 May 16:01

motifeme, n.

firehose

"In the study of folk tales: a story element, as a character, event, incident, circumstance, etc., usually one common to tales from many different sources."

basically, motif meme

22 May 15:59

Twitter / Alphastream: And there you have the missing ...

by gguillotte
firehose

Basic chargen rules will be free on WotC's site, which is nice of them. Still doesn't explain why it's not in the Starter Set, though.

And there you have the missing part of the puzzle! Starter Set basic-level character creation in #DnD can be done free.
22 May 15:41

Custom car culture in Japan – Lamborghini with LEDs & hologram vinyl wrap (video)

by adafruit


Custom car culture in Japan – Lamborghini with LEDs & hologram vinyl wrap (video).

22 May 15:40

drawille – Drawing in terminal with Unicode Braille characters

by adafruit

Rotating Cube

asciimoo/drawille.

Drawing in terminal with Unicode Braille characters.

22 May 15:40

Nervous System – Debutes Kinematics Cloth App at Solid 2014 #3DxFashion #3DThursday #3DPrinting

by Matt

Kinematics Clothing App

Nervous System debuted Kinematics Cloth app to help people produce 3D-printable clothing:

…Our Kinematics design system pairs a constructional logic of hinged panels with a simulation strategy of folding and compression to produce customized, flexible designs that can be fabricated efficiently by 3D printing.

At Solid, we will debut Kinematics Cloth, a new app that allows people to design their own 3d-printable clothing from 3D scans of their body. The browser-based app supports the real-time design of shirts, skirts and dresses. Users sculpt the overall shape of their garment and paint patterns and textures onto its surface. By varying the size of panels, they can construct garments that drape, flow and move in ways unique to this one-of-a-kind “fabric”.

We’ve partnered with Body Labs to create Kinematics pieces custom fit to your body. Body Labs creates accurate and clean body models from 3D scans or measurements. These models are fed directly to our Kinematics app, allowing any design adapt to your exact shape….

Read More. And link to Solid 2014 page here.

Pasted Image 5 22 14 2 25 AM


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! We also offer the Printrbot Simple Metal 3D Printer in our store. If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

22 May 15:40

Hellmouth from a fresco at the Church of Sant’Eusebio e...



Hellmouth from a fresco at the Church of Sant’Eusebio e Vittore a Peglio, Lake Como, Italy 

22 May 15:39

beggin: Eyes on the Prize 



beggin:

Eyes on the Prize 

22 May 15:39

Woman describes attack by self-identified 'high elf'

firehose

'"Even trying to call my insurance agency and tell them, they didn't even really know what category to put that in. It's so bizarre,” she said.

When asked if he regrets what happened, Bass said, “I mean, yeah, to a certain point. I don't like, if I met the lady I would apologize to her for terrorizing her."

"It upsets me that he was so violent and menacing, and I think that he shouldn’t be, that he should get treatment. He shouldn’t be on the street. What's hard for me is it's such a bizarre story, and it's easy for people to not take it seriously that troubled me because it was such a dangerous situation,” Bales said.

Her car will be in the shop for two weeks getting the damage from the sword fixed. Bales also tells KATU News she’s been asked to testify before the grand jury next week.

Bass hasn’t been charged with any crimes yet, although police say he is facing charges.'

--

yo but seriously, this could've been much, much worse

22 May 15:34

Stan Lee responds to David Goyer’s She-Hulk remarks

by Kevin Melrose
firehose

' “I know I was looking for a new female superhero, and the idea of an intelligent Hulk-type grabbed me,” he told The Post. (The generally accepted backstory has more to do with Marvel’s concerns that CBS might create a spinoff of the live-action Incredible Hulk television series starring a female counterpart, a la Bionic Woman, giving the network ownership of the character.)'

Stan Lee responds to David Goyer’s She-Hulk remarks

Stan Lee scoffs at screenwriter David S. Goyer’s suggestion that She-Hulk was created as “a giant green porn star that only the Hulk could fuck,” responding that, “Only a nut would even think of that.” “Never for an instant did I want her as a love interest for Hulk,” Lee, who with artist John Buscema […]
22 May 15:13

The Los Angeles Kings have started a pizza war

by James Dator
firehose

Type C Type C Type C Type C

Shots fired!

Was told there would be pizza in the press box, sadly they only have a Chicago casserole. #BoomRoasted pic.twitter.com/hiiwVW9OJp

— LA Kings (@LAKings) May 22, 2014

The Los Angeles Kings' twitter account is a place of wonder and wonderful banter -- but now they've started some pizza beef with Chicago and there's no telling how deep (dish) we'll go down the rabbit hole.

Pizza talk normally generates one of three types of people:

Type A, "The purist": Has their favorite type of pizza and decries all others. The epitome of the purist takes it step further by poo-pooing any pizza that isn't from their favorite place "All pizza sucks except that place near 110th and Broadway."

Type B, "The all pizza is good pizza": This person believes that pizza itself is beautiful, warts and all. It could come from a rest stop in Biloxi or a cafeteria in Boise -- it's all good.

Type C, "Give it to me now!": The third pizzaist cares not about labels, they like the ingredients. You can deconstruct it, put it in a pizza roll or make a pizza burger and they'll gobble it down. The easiest to please, but also slightly worrisome.

Way to be a purist, Los Angeles. The pizza wars have begun.

22 May 15:10

Sweet Dreams

by Dorothy

Comic

22 May 15:08

Buy My Volvo (English) (by PonyHans)

firehose

just realized this is the same car (but newer)



Buy My Volvo (English) (by PonyHans)

22 May 15:08

postcardsfromspace: jthenr-comics-vault: KAIJU JAM! GODZILLA...

firehose

whopps, theres is it



postcardsfromspace:

jthenr-comics-vault:

KAIJU JAM! 
GODZILLA VS. BARKLEY (Dec. 1993)
Dark Horse Comics
Art by Jeff Butler & Keith Aiken 
Words by Mike Barron

WEIRD COMICS TRIVIA: There’s a framed copy of Godzilla vs. Barkley that’s been circulating through the DH editorial department for years—I inherited it in 2010 from Katie Moody, who (If I recall correctly) got it from Dave Land. I think Patrick Thorpe has it these days.

22 May 15:07

doncoyote: grawly: spadesslick: chinese-gender: THIS IS AN...

firehose

this show



doncoyote:

grawly:

spadesslick:

chinese-gender:

THIS IS AN EXTREME THIRST

Yaoi water

the best part about this scene is that it takes place during a conversation at a restaurant and everything about the actual setting is normal except this shot of his water being disproportionately large is injected for about one single second and goes back to normal in the next cut.

it is never actually mentioned 

Cromartie High School is a gift and a blessing.

22 May 14:46

maybethings: r-igby: lokeanconcubine: MOTHER. FUCKING. CHEESE....

firehose

via Toaster Strudel





















maybethings:

r-igby:

lokeanconcubine:

MOTHER.

FUCKING.

CHEESE.

this post means a lot to me

CHEEEEEEEEEEESE

cheese is love

22 May 14:41

It's OK not to use tools

by Jonas Downey
firehose

via Jfiorato
Ben Wolf likes this

Recently I did a little side project to improve the website for a non-profit animal shelter in our town. The existing site was an outdated Microsoft FrontPage menagerie, so basically anything I did would be a big improvement.

I spent around 20 minutes creating a simple design in HTML, and then several hours editing, rewriting, and refining the copy. In the end, I reduced a scattershot 25-page website down to about 8 focused pages written in a friendly tone.

My next instinct was to apply our great modern web toolset to the site. Let’s add a static site generator or a CMS! Let’s add Sass and a grid system! Let’s do more fashionable things!

Then I started looking at those tools critically. A static site generator usually requires knowing Markdown and esoteric commands and configuration. A typical CMS will need setup, logins, security patches, templates, and maintenance. Even hosted CMSes have a lot of cognitive overhead, and the content is trapped away inside someone else’s system.

These are tools made by geeks, for geeks. Why do we need a CMS for an 8-page site? And for that matter, why even bother with Sass? Regular old CSS can do the job just fine.

Who knows who will take over the site in the future. I’ll hang with it for a while, but someday someone else might have to work on it. It would surely be easier to do that with 8 simple, straightforward HTML files than with some custom WordPress installation that’s several versions out of date. So what if I have to repeat the navigation markup 8 separate times? It’s not that hard. We used to do it for much larger sites!

Today, a basic HTML/CSS site seems almost passé. But why? Is it because our new tools are so significantly better, or because we’ve gone overboard complicating simple things?

As builders, we like tools and tech because they’re interesting and new, and we enjoy mastering them. But when you think about the people we’re building for, the reality is usually the opposite. They need simple designs, clear writing, less tech, and fewer abstractions. They want to get stray animals adopted, not fuss around with website stuff.

Remember when the web was damn simple? It still can be. It’s up to us to make it that way.

22 May 14:40

Before the Eurostar: Remains of the Flying Rail Plane that Never Was

by MessyNessy
firehose

via rnas
never fly, unless it's on trains~

railplane

In a slight twist of fate, we might have been traveling between London and Paris in one of these thing-a-majigs– or more accurately, a propeller-driven ‘Flying Railplane‘. This fancy futurist contraption was invented by George Bennie and launched in 1930 as a prototype, designed for a more economical and rapid transport system between the two European capitals.

georgebennieposter1

The test track was built in a commuter town called Milngavie in Glasgow, Scotland. It ran over 120 meters suspended a dozen feet above the ground with rails to support the cigar-shaped train both overhead and underneath. Electric propellors at either end moved the train forward. 

railplane1

When the media was invited to take a ride on the rail plane in July of 1930, they were quite taken with it, and hailed it a ‘wonderful product of British brains’. Compared to the bumps and whistling of a conventional train, traveling in Bennie’s railplane coach was luxuriously smooth and quiet. There was only one problem. No one wanted to fund it. 

railplane2

After financing the original test track himself, in 1937 Bennie went bankrupt and the inventor’s dream was over. The test track hung around, quite literally, for another 25 years, rusting and abandoned before it was finally demolished for scrap in the mid 1950s, around the same time Bennie died in obscurity. Ten years after that, the prototype itself was also scrapped. Only the original shed where the carriage was built is still standing with a blue plaque commemorating the Railplane on the wall outside.

georgebennie1

 

And then the French had a go…

monorail1

The above article published in May 1930, features a monorail design by engineer Joseph Archer, but not for another 35 years would the French see their own ‘flying railplane’ realised from an inventor’s sketchbook…

aeroplane

aerotrain2

aerotrain3

Enter the Aérotrain, the monorail hovertrain developed in France from 1965 to 1977 by engineer Jean Bertin. While this revolutionary yet experimental mode of transport is now very much defunct, unlike its British counterpart, you can still find its abandoned elevated tracks parallel to the the Paris-Orleans railway route…

aerotraintracks

aerotraintracks2

aerotraintracks1

aerotrain1

In Gometz-la-Ville, where the track is most overgrown, a vandalised sculpture of the aérotrain is the sole clue as to what purpose the aged and forgotten concrete structure served. Some parts of the tracks (originally more than 25km in total) have been demolished to make way for highways while others are completely intact more than 40 years later.  The first prototype aérotrain set the speed record for trains in the 1960s at 430 km/h, a time that would take France’s current high-speed rail service, TGV, another 20 years to beat.

Bertin_I80_250_2

Bertin_I80_250_1

aerotraincar

aerotrainproto

Under President Georges Pompidou, the project received government approval in 1965 and continued its successful development until the mid 1970s. Political power shifted and with it came the adoption of the TGV by the French government as its high-speed ground transport solution, subsequently ending the aérotrain adventure. The financial interests of some were too powerful for the visionary engineer Jean Bertin and his talented collaborators, who had dedicated their lives to the project. Bertin’s death from cancer came soon after and what seemed like continuous sabotage of the aérotrain’s future eventually saw the whole venture entirely abandoned. 

aerotrainbeforeafter

TFR_Gometz_10

TFR_Gometz_11

TFR_Gometz_3

The prototypes were kept in the hangar at Chevilly but some disrespectful visitors saw to it that they didn’t stay in good condition for very long…

aerotrainhangar

The first prototype was restored and moved to Jean Bretin association in a secure location, but un 1991 a fire destroyed one of the remaining prototypes in Chevilly while the others were badly damaged. Talk of a museum for the surviving aérotrains began in 1992, but just before approval from the Ministry of Transport came through, another fire almost destroyed everything left in the hangar. Charred remains of the trains were scrapped and the abandoned hangar was demolished in 1997.

I80_Incendie

aerotrainburnt

It wasn’t until 2001 that the last restored Aérotrains from Bretin’s association would be seen again by the public at the Retromobile exhibition in Paris. The only other visible trace of the Aérotrain’s existence are the remains of the concrete track it once flew over.

aerotrainblackwhite

aerotrainblackandwhite1

As fine and dandy as the Eurostar and the high-speed TGV trains are, who doesn’t wish the future had brought us the flying railplane?!

Images via here, here and here.

 

22 May 14:34

Photo

firehose

via Tadeu



22 May 14:33

2087: Lego Cyberpunk City *I hope those are authentic 1980s...

firehose

via Jakkyn
LEGO Shadowrun





















2087:

Lego Cyberpunk City

*I hope those are authentic 1980s Lego blocks

22 May 14:29

ohnoproblems: mulodyne: nineprotons: bycrom: By Crom! is my...

firehose

via Bunker.jordan





















ohnoproblems:

mulodyne:

nineprotons:

bycrom:

By Crom! is my joke-a-panel autobiographical comic featuring life advice and spiritual guidance from Conan the Barbarian. It ran from January 2012 to May 2014, and is collected in two books, The Collected By Crom! and Full Colour Cromulence. You can read the archives on WealdComics.com, and grab the books in print and in PDF.

By Crom! will be tabling with Weald Comics at TCAF, VanCAF, TAAFI and possibly FanExpo Toronto!

This is weirdly inspiring.

this is such a good comic

thanks conan

22 May 14:20

Homer Simpson (The Simpsons) and Shinji Ikari (Neon Genesis...

firehose

via Bunker.jordan













Homer Simpson (The Simpsons) and Shinji Ikari (Neon Genesis Evangelion)

Parallels