Shared posts

26 Mar 16:42

Design Fiction: fashion for computer game character design

by Bruce Sterling

http://community.eidosmontreal.com/blogs/Fashion-of-Deus-Ex

Credible, Sophisticated, Unexpected: The Fashion of Deus Ex

Posted by Valerie Bourdeau

“The stylistic choices in Deus Ex were not (well, not only) based on the whims of the Art Director. They were educated speculation informed by a whole lot of research into contemporary advances in architecture, industrial design, urban planning and fashion. The art team aimed to create environments, props and characters that look and feel like they belong in a fully realized universe. Clothing is a small but omnipresent part of that work, as it allows us to show rather than tell all kinds of physical and symbolic information about the game world.

“To contribute effectively to the immersive experience, the fashion first had to be credible. One of the strategies employed to make things in the game look real was to show evidence of how they were made. The clothes worn by every character look like they’re made of realistic materials, with visible seams, zippers and closures, and signs of wear and tear. If you have some experience sewing, you should be able to see how each garment was constructed.

“Instead of putting everyone in shiny jumpsuits and calling it futuristic, the artists took inspiration from real contemporary fashion designers like Andreia Chaves, Iris Van Herpen, Gareth Pugh and Issey Miyake….” (((Well, yeah… if you’re gonna do fashion, why not just go ahead and extrapolate what really exists on the catwalk?)))

26 Mar 16:34

Do You Want More Flexible 3D Printing at Shapeways?

by blog@shapeways.com (Duann)

We found a squishy 3D printing material back in early 2012 that was not quite ready for us to use with our 3D printers so we found another flexible alternative that unfortunately was not up to our standards so we had to stop supporting the material when the trial ended.  

We are super excited to learn the original flexible material is finally ready and we are preparing our 3D printers so that we can offer it to everyone to 3D print.  

Do you want more flexible 3D printing for your designs?


18 Mar 07:06

How Drones Can Live off the Land for Years

by John Robb

Smart-drone-can-autonomously-avoid-obstacles-video--371ed763da
Cyberweapons and synthetic biological weapons (GMOs) can self provision.  

They have the ability to live off the land (hosts, like human bodies and PCs) once they are unleashed.  

NOTE:  In many cases, they can also make perfect copies of themselves (copies in the trillions).  

But what about drones?  

Aren't they limited by quantity of energy in their batteries?

Yes, drones do have the capacity to self provision too.  One of the more elegent ways is for a drone to use power lines to "induct" the energy it needs.

A drone that can recharge itself from a power line has the potential to operate for years -- monitoring, relaying, etc. -- without returning to base.  

If the decision making software is good enough it could source its energy and target data for years without referencing any command system.

In fact, with wireless access to the Internet (including RSS feeds), GPS, and other easily accessible data sources... it decision making can be very dynamic.  

Here's a video showing some US DoD contractors working on making that a reality, right now:

15 Mar 16:30

How I feel this morning

by Charlie Stross

I am not amused. Yet another example of the impermanence of cloud services (especially services that you don't, ahem, pay money to receive).

11 Mar 22:48

Turing and interaction at the Science Museum in London

by Zoe Romano

Looping by Hirsch&Mann

Codebreaker is the exhibition started last year at  the Science Museum of London and celebrating  the centenary of the birth of computing pioneer Alan Turing.

Hirsch&Mann were commissioned to create a “series of exhibits which demonstrated and recognized the progress in computing while at the same time representing a spirit of engineering and innovation” .

They created three installations that demonstrated 3 programming principles:

LOOPING: A spinning rotor with LEDs on it -> creating POV patterns all controlled by 30 arcade style illuminated switches.

CONDITIONALS: A version of Wolfram’s cellular automata – user was able to choose the result of the child node once the parent node conditions were met

VARIABLES: A mechanical tree – the branch angles were controlled by sliders on the console. Slider A controlled 1 angles at the base of the tree, slider 2 controlled the next 2 angles, slider 3, the next 4 angles and slider 4 the final 8 sliders.

Looping Console by Hirsch&Mann

Each installation has a light box which is revealed as soon as you press the BIG GLOWING button on the console. This turns on the lightbox – which has simplified pseudo code and essentially allows people to “step into” the code. Each line that is currently running is highlighted and then you see the result on the installation.

The whole point of these installations was to show where we have come since Turing’s time and stepping on his shoulders.

If you have the chance to visit the exhibition (it’s free!) or watch the video below you will see that at the center of each console there is an Arduino UNO.

 

08 Mar 07:49

Foxy laser cutting

by Sam

The Laser Cutter Roundup — a weekly dose of laser-cut love: #115

Hey, Sam here collecting the post from The Laser Cutter.

Make sure you join TLC’s Facebook page.

Above is a laser cut fox and babies brooch via Sally Crossthwaite.

After the jump, a crane, an African Village, and  Redd at work…

Above is a laser cut wood shipping container crane from Studio for Metropolitan Craft.

Above is a laser cut steel Burning African Village Play Set by by artist Kara Walker via Jim Black.

Above is Redd Walitzki at work painting on a laser cut panel.

Posted in Laser Cutting, Sam Tanis by Sam | Comments are off for this post

06 Mar 04:13

Revealing Dita Von Teese in a Fully Articulated 3D Printed Gown

by blog@shapeways.com (Duann)

Dita Von Teese in Shapeways 3D Printed Gown

Last night at the Ace Hotel in New York to a crowd of uber-cool fashonistas and paparazzi we revealed the 3D printed gown designed by Michael Schmidt and Francis Bitonti modeled by queen of burlesque Dita Von Teese

Dita Von Teese in Shapeways 3D printed gown

The fully articulated gown based on the Fibonacci sequence was designed by Michael Schmidt and 3D modeled by architect Francis Bitonti to be 3D printed in Nylon by Shapeways.  The gown was assembled from 17 pieces, dyed black, lacquered and adorned with over 13,000 Swarovski crystals to create a sensual flowing form.

3D printed gown detail on Shapeways



Read More »
06 Mar 03:22

Photo



05 Mar 05:55

A DIY digital camera made with cardboard and an Arduino

by Taylor Gilbert

A simple, open source camera you can make at home.

Photographer Product Designer Coralie Gourguechon made the Craft Camera as a way of countering the “planned obsolescence and complexity of electronic products.” All of the components are open source, and the design has a Creative Commons license.

The major components, in addition to an Arduino UNO, are a lithium battery pack, a Snootlab SD card Arduino shield, and a JPEG color camera TTL interface. The design for the case can be printed onto cardboard, cut out with a utility knife, and glued together. More detailed information is available on the project’s open source page, but the code and detailed plans are, unfortunately, not yet available. The site says they will be “released soon,” so be sure to check back later.

Via MOCOLOCO


Taylor Gilbert is a proponent of creative technology including Arduino, Processing, and repurposed hardware. Follow him @taylor_gilbert

Posted in Hardware, Maker Movement, Open Source, Taylor Gilbert by Taylor Gilbert | Comments are off for this post

01 Mar 23:00

Symphony of Science – Secret of the Stars (video)

by adafruit


Symphony of Science – Secret of the Stars (video).

01 Mar 07:04

Conductive brain-reading tattoos

by Bruce Sterling

*This pushes so many weirdness-buttons that it must be the ultimate io9 article to date.

http://io9.com/5985558/temporary-tattoos-could-make-electronic-telepathy-and-telekinesis-possible

*Can’t wait for the Google Glass tie-in.

27 Feb 20:27

Augmented Reality: MYO muscle controller

by Bruce Sterling

*This looks a lot less “laughable” than the current fetish for staring into and stroking small glass panels in public.

http://www.engadget.com/2013/02/26/MYO-armband-muscle-control/

“With visions of Minority Report, many a user’s hoped to control gadgets by wildly waving at a Kinect like a symphony conductor. Now there’s another way to make your friends laugh at you thanks to the Thalmic Labs’ MYO armband, which senses motion and electrical activity in your muscles to let you control your computer or other device via Bluetooth 4.0. The company says its proprietary sensor can detect signals right down to individual fingers before you even move them, which — coupled with an extremely sensitive 6-axis motion detector — makes for a highly responsive experience. Feedback to the user is given through haptics in the device…”

(((Well, the video’s a hit, anyhow.)))

13 Feb 18:00

Micrometer Scale 3D Printing

by General Fabb
German-based Nanoscribe announced a new micrometer-scale 3D printer, the Photonic Professional GT, billed as the "world's fastest commercially available 3D printer for micro- and nanostructures".    The Photonic Professional GT uses a highly accurate, mirror-guided laser system to polymerize photosensitive material into solid objects of incredibly tiny size. The machine is capable of producing fine structures of less than 1 micrometer, as you can see in this spectacular image of a human hair with their logo built on top. (Click for larger view.)   The machine prints in such a small area the company has invented a technique for seamlessly connecting multiple build areas to compose "larger" objects.    It's not clear how fast this device might be, but we suspect it is not quick enough for mass manufacturing. However, like many 3D printers, it should be very useful for producing prototypes of ultra-small scale.    Via Nanoscribe
10 Feb 19:09

In the past year, the Northern portion of Mali slipped into...



In the past year, the Northern portion of Mali slipped into chaos, leaving it without military or law. Islamist militants with a bad habit of kidnapping Westerners took control of the cities, and even the most dogged reporters beat a hasty retreat to the capital. Western media empires constructed around the need to report, instead turned to the internet sources, cellphone photos, and cryptic utterances on Facebook walls. Timbuktu was again the fabled city of Caillié, a closed mystery that not even the combined forces of CNN, BBC, RFI, and the mighty Al-Jazeera could penetrate.

It’s not surprising then that the most ambitious sources of Northern Mali “news” has invoked the authority of newsroom reporting. During the past months, “Tamositte n’Azawad” (“the Kitten of Azawad” –facebook) has been issuing broadcasts on the situation in the North, with a penchant for satire and comedy. The creation of a collective of young Tuareg women living abroad in Sweden, Tamositte has been one of the most consistent media voices. Utilizing an iPhone/Android App known as “Talking Tom Cat”, the tool has been transformed into a new media mouthpiece, addressing very specific particulars of the conflict that are glossed over by international media: alliances between MNLA and Ansar Dine, critiques of hypocrisy of the MUJAO factions, and ousting of corrupt politicians.

I spoke to one of the creators of Tamositte. Her goal, she said, was to raise awareness amongst the Tuareg in the North. By connecting with youth in these cloistered towns such as Kidal, she could comment on these topics of discussion concerning the Tuareg community. Tamositte videos have undoubtedly found their way from Facebook and onto cellphones, the messages relayed throughout the scattered populations of the besieged Northern towns with a comic authority that resonates. As the international community advances to chase out foreign extremists in the North, it will be greeted by the Tuareg, but the international media may not be so welcome. A new adversary has taken its place.

The Talking Cat of Azawad - Sahel Sounds

08 Feb 17:46

Political failure modes and the beige dictatorship

by Charlie Stross

Random meta-political noodling here ...

For a while I've had the unwelcome feeling that we're living under occupation by Martian invaders. (Not just here in the UK, but everyone, everywhere on the planet.) Something has gone wrong with our political processes, on a global scale. But what? It's obviously subtle — we haven't been on the receiving end of a bunch of jack-booted fascists or their communist equivalents organizing putsches. But we've somehow slid into a developed-world global-scale quasi-police state, with drone strikes and extraordinary rendition and unquestioned but insane austerity policies being rammed down our throats, government services being outsourced, peaceful protesters being pepper-sprayed, tased, or even killed, police spying on political dissidents becoming normal, and so on. What's happening?

Here's a hypothesis: Representative democracy is what's happening. Unfortunately, democracy is broken. There's a hidden failure mode, we've landed in it, and we probably won't be able to vote ourselves out of it.

Representative democratic government is theoretically supposed to deliver certain benefits:

  • Firstly, it legitimizes principled, peaceful opposition within the constitutional framework; we have multiple parties, and the party in power doesn't simply round up the opposition and have them thrown in a GULAG. They concede that the opposition may disagree with the party in power on precisely how the state must operate, but agree that it should operate: the difference is a civilized argument over details, not a knife-fight with totalitarian enemies.

  • Secondly, it provides for an organized, peaceful succession mechanism. When a governing faction becomes unpopular, it can be voted out of office, and will go peacefully, knowing that eventually their successors will become unpopular in turn, and there'll be another chance to take a bite of the apple. (Totalitarian governments tend to hang on until people start shooting at them, with a variety results we've recently had a refresher course in — Libya, Syria, Egypt, Iran.)

But. But.

What if the channels through which concerned people of goodwill who want to make things better enter the political process and run for election are fundamentally flawed?

Our representative systems almost all run on a party system; even pure PR systems like that of Israel rely on a party list. (I could take out Israeli citizenship and run for the Knesset, but I'd be running as "the Charlie Stross Party", not as myself: if I was a runaway success I'd need to find some extra representatives to tag along on my coat-tails.) Parties are bureaucratic institutions with the usual power dynamic of self-preservation, as per Michels's iron law of oligarchy: the purpose of the organization is to (a) continue to exist, and (b) to gain and hold power. We can see this in Scotland with the SNP (Scottish National Party) — originally founded with the goal of obtaining independence for Scotland and then disbanding, the disbanding bit is now nowhere to be seen in their constitution.

Per Michels, political parties have an unspoken survival drive. And they act as filters on the pool of available candidates. You can't easily run for election — especially at national level — unless you get a party's support, with the activists and election agents and assistance and funding that goes with it. (Or you can, but you then have to build your own machinery.) Existing incumbent representatives have an incentive to weed out potential candidates who are loose cannons and might jeopardize their ability to win re-election and maintain a career. Parties therefore tend to be self-stabilizing.

A secondary issue is that professionals will cream amateurs in any competition held on a level playing field. And this is true of politics as much as any other field of human competition. The US House of Representatives is overwhelmingly dominated by folks with law degrees (and this is not wholly inappropriate, given they're in the job of making laws). The UK's Parliament is slightly less narrowly circumscribed, but nevertheless there's a career path right to the top in British politics, and it's visible in all the main parties: you go to a private school then Oxford or Cambridge, participate in student politics (if you're on the left) or debating societies (if you're on the right), take a post as researcher or assistant for an MP or (less commonly) run for a local council office, then run for parliament. There are plenty of people in every democratic constitutional system who have never held a job outside of politics — and why should they? Such a diversion would be a waste of time and energy if your goal is to make a difference on the national stage.

The emergence of a class of political apparatchik in our democracies is almost inevitable. I was particularly struck by this at the CREATe conference, which was launched by a cookie-cutter junior minister from Westminster: aged 33, worked in politics since leaving university, married to another MP, clearly focused on a political career path. She was a liberal democrat, but from her demeanour, speech, and behaviour there was nothing to distinguish her from a conservative, labour, or other front-rank party MP. The senior minister from Holyrood was a little bit less plasticky, slightly more authentic — he had a Glaswegian accent! And was a member of the SNP! — but he was still one of a kind: a neatly-coiffured representative of the administrative senior management class, who could have passed for a CEO or senior bank manager.

So, here's my hypothesis:

  • Institutional survival pressure within organizations — namely political parties — causes them to systematically ignore or repel candidates for political office who are disinclined to support the status quo or who don't conform to the dominant paradigm in the practice of politics.

  • The status quo has emerged by consensus between politicians of opposite parties, who have converged on a set of policies that they deem least likely to lose them an election — whether by generating media hostility, corporate/business sector hostility, or by provoking public hostility. In other words, the status quo isn't an explicit ideology, it's the combined set of policies that were historically least likely to rock the boat (for such boat-rocking is evaluated in Bayesian terms — "did this policy get some poor bastard kicked in the nuts at the last election? If so, it's off the table").

  • The news cycle is dominated by large media organizations and the interests of the corporate sector. While moral panics serve a useful function in alienating or enraging the public against a representative or party who have become inconveniently uncooperative, for the most part a climate of apathetic disengagement is preferred — why get involved when trustworthy, reassuringly beige nobodies can do a safe job of looking after us?

  • The range of choices available at the democratic buffet table have therefore narrowed until they're indistinguishable. ("You can have Chicken Kiev, Chicken Chasseur, or Chicken Korma." "But I'm vegan!") Indeed, we have about as much choice as citizens in any one-party state used to have.

  • Protests against the range of choices available have become conflated with protests against the constitutional framework, i.e. dissent has been perceived as subversion/treason.

  • Occasionally cultural shifts take place: over decades, they sometimes reach a level of popular consensus that, when not opposed by corporate stakeholders, leads to actual change. Marriage equality is a fundamentally socially conservative issue, but reflects the long-term reduction in prejudice against non-heteronormative groups. Nobody (except moral entrepreneurs attempting to build a platform among various reactionary religious institutions) stands to lose money or status by permitting it, so it gets the nod. Decriminalization of drug use, on the other hand, would be catastrophic for the budget of policing organizations and the prison-industrial complex: it might be popular in some circles, but the people who count the money won't let it pass without a fight.

Overall, the nature of the problem seems to be that our representative democratic institutions have been captured by meta-institutions that implement the iron law of oligarchy by systematically reducing the risk of change. They have done so by converging on a common set of policies that do not serve the public interest, but minimize the risk of the parties losing the corporate funding they require in order to achieve re-election. And in so doing, they have broken the "peaceful succession when enough people get pissed off" mechanism that prevents revolutions. If we're lucky, emergent radical parties will break the gridlock (here in the UK that would be the SNP in Scotland, possibly UKIP in England: in the USA it might be the new party that emerges if the rupture between the Republican realists like Karl Rove and the Tea Party radicals finally goes nuclear), but within a political generation (two election terms) it'll be back to oligarchy as usual.

So the future isn't a boot stamping on a human face, forever. It's a person in a beige business outfit advocating beige policies that nobody wants (but nobody can quite articulate a coherent alternative to) with a false mandate obtained by performing rituals of representative democracy that offer as much actual choice as a Stalinist one-party state. And resistance is futile, because if you succeed in overthrowing the beige dictatorship, you will become that which you opposed.

Thoughts?

08 Feb 06:56

Jots And Tittles

by Jon

Jots And Tittles

How do you explain numerous contradictions in a holy text written by a perfect, infallible being? Poetic license? Jokester Deity? Or just indecisive nitwitticism?

No, seriously, how do you explain it?

SFAM Books are on sale today. They’re still the same price as normal, but we are selling them.

buy a book damn you

 

07 Feb 03:47

cyberneticsarenow: Lovin’ the jacket and tattoos.



cyberneticsarenow:

Lovin’ the jacket and tattoos.

06 Feb 02:21

Better Than The Borg: The Neurotech Era

by Ramez Naam
Jakkyn

Monkey cocaine dealer: best job title ever?

What if you could read my mind? What if I could beam what I’m seeing, hearing, and thinking, straight to you, and vice versa? What if an implant could store your memories, augment them, and make you smarter?

Long the stuff of science fiction, technology that can directly tap into, augment, and connect human brains is becoming science fact. And that means big changes for all of us.

Consider what we’ve already done – getting data in and out of the human brain:

Hearing – At least 200,000 people alive today use a cochlear implant. A cochlear implant looks like a hearing aid, but it works quite differently. It takes sound waves in the environment and transforms them into nerve impulses to the auditory nerve. In creating it, we’ve tapped into and partially decoded the way the nervous system represents sound.

Sight – In 2002, researchers restored vision to a blind man by wiring the output from a digital camera directly into the primary visual cortex in his brain. A Matrix-style jack from the camera went straight into his brain, enabling him to see, though both his eyes had long since been destroyed. Now a related technology is on the verge of FDA approval for widespread use in blind patients.

Video Out – Researchers have also shown that by using an fMRI brain scanner, they can reconstruct what a person is seeing, demonstrating that we can get visual data both into and out of the human brain.

Motion – In 2000, a quadriplegic patient named Johnny Ray became the first to receive a brain implant that would allow him to move a cursor by thought.  Now, even better versions of the technology are in human trials. Last year, researchers published a video of a paralyzed woman using a robot arm to feed herself chocolate by thinking about it.

All of these are crude technologies.  They are very very early versions of a technology that is just getting started. Yet as engineers produce better methods for increasing the amount of data that can go in and out of the brain, the fidelity of sight and sound and the accuracy of movement will increase.

What’s more, in animals, researchers are going beyond simple sensation or motion.  They’re starting to tap into higher functions.  For example:

Memory – In 2011, researchers working on ways to repair damage to the hippocampus – part of the human brain that’s critical for forming new memories – demonstrated that their artificial ‘hippocampus chip’ could actually improve memory in rats.

Intelligence – In 2012, a team at Wake Forest University went further. They trained rhesus monkeys on a task that was, in a crude sense, a monkey IQ test. As the monkeys learned, a brain implant in their frontal cortex – the part of the brain involved in decision making and attention – watched how the monkey’s brains worked and learned those patterns. Then the researchers impaired the monkeys’ performance on those tests by giving them doses of cocaine. What the researchers found was that, as they hoped, turning the implant on could undo the temporary damage done by the cocaine. But more than that, it could improve the monkeys’ performance on the test, beyond their baseline scores.

If we can manipulate memory and intelligence, we may also be able to communicate memories or thoughts from person to person. Scientists are already discussing the impact of wiring two hippocampus chips together.

What would it mean to be able to communicate sensory data directly from one mind to another?  To show someone what you’re seeing, imagining, thinking, or feeling?  What would it mean to have neural prosthesis that would augment our memory, our attention, our decision making?

These changes could fundamentally empower individuals. They could make us smarter and more productive. But more importantly, by enhancing our ability to communicate, they could supercharge the process of innovation that today relies on the connections between minds.  Just as the printing press, by improving the spread of ideas, helped bring on the Renaissance, mind to mind connections could herald a new era of progress.

At the same time, these technologies raise new and sinister issues.  If our brains are wired together by electronics, will we be vulnerable to bugs? Software crashes? Computer viruses and malware?  Perhaps more importantly, who will be in control?  Will governments use this technology to spy on and oppress their people, as in 1984?  Will they turn us into a version of Star Trek’s Borg?

Or will enhanced neurotechnology, like other information technologies, primarily serve as a new tool for liberty?

My bet is on the latter.  Throughout history the ability to communicate has supercharged our rate of innovation, has boosted our collective intelligence, and has worked to expand our individual freedoms and capabilities.

Whatever the answers, we are entering the neurotech era.  There is no turning back.

Ramez Naam is an adjunct faculty member at Singularity University and fellow at the Institute for Ethics and Emerging Technologies. In his new novel NexusRamez explores the impacts of neurotechnology on individuals, governments, and civil liberties. 

Featured image: maltman23/Flickr

05 Feb 00:25

thejaymo: Flying over the Tulips Fields in Anna Paulowna it...



thejaymo:

Flying over the Tulips Fields in Anna Paulowna

it looks like the earth corrupted and stopped rendering correctly

04 Feb 19:35

Photo

by 3liza


03 Feb 09:39

Finger Trap handbags by James Piatt

by Dan Howarth

Product news: these handbags by American designer James Piatt are carried by clamping fingers in woven tubes similar to Chinese finger trap puzzles. (more...)

02 Feb 20:41

makexyz Makes Your Stuff

by General Fabb
You're interested in 3D printing, but don't have a 3D printer. You also don't want to pay a high price to a 3D print service to obtain a print of your own 3D design. What do you do?    One option, aside from finding a buddy with a 3D printer, is to use the makexyz service. It's a low-cost, distributed 3D print service composed of a network of 3D printer owners willing to perform the print for you. makexyz produces a quote and dispatches your design to a nearby printer, who makes the item and ships it to you.    We spoke with makexyz's Nathan Tone, who answered some of our questions:    Fabbaloo: Can you print in something other than plastic? Colors?  
Nathan Tone: Currently just ABS and PLA with wood, nylon and aluminum to be added in the next few weeks. More colors are being added every day. Currently red, blue, green, purple, clear, white, black, silver. 
  Fabbaloo: What kinds of 3D printer participants are you looking for? Brands? Material types?   
Nathan Tone: All shapes, sizes and price points. From a Thing-o-Matic to an Objet Pro 30 
  Fabbaloo: What charge levels / rates will consumers pay for a given print? How do you calculate it?  
Nathan Tone: Consumers save a pretty significant amount of money. What costs $20-$30 at shapeways and imaterialize is usually $10-$15 at makexyz.
  Fabbaloo: What's in this for the printer operator? How much are they paid per print? Is it a percentage?  
Nathan Tone: The printers set their own prices (a $ per cubic centimeter). So it's great for the printers; they can keep their printers humming and make some money / maker friends on the side!
  So far makexyz says they've signed up "Hundreds" of participants, "with more added daily".    If you're interested in trying out makexyz, check them out at the link below.    Via makexyz
30 Jan 21:33

4-Foot-Wide Home in Poland is Now Thinnest in the World

by Urbanist
[ By WebUrbanist in Architecture & Houses & Residential. ]

Nestled in the interstitial space between two existing structures and raised up one story from the street sits an improbable structure, proposed then built as an artist-in-residence live/work dwelling of incredible audacity and engineered ingenuity.

We have seen skinny houses and other buildings in places like Japan before, but no single-unit residence that matches this narrow wonder where even the bed is barely wide enough to sleep one.

Transparency, translucency and a tall angled roofs are essential to making the interior feel larger than it is. A bedroom, lounge, bathroom and office are all included at various levels, giving it a sense of separation despite all spaces running (by necessity) along the same plane.

Exposed cross-beams give each wall a sense of depth, and direct the eye up, down and out, enhancing the illusion of openness. And the inspiration for this art-centric abode designed by Bartek Warzecha for the Polish Modern Art Foundation? An extreme short story writer named Etgar Keret.

Want More? Click for Great Related Content on WebUrbanist:

Slim Living: World’s Thinnest House is Just Four Feet Wide

The world's smallest house is a four-foot-wide guest residence for artists, crammed between two more conventional buildings in Warsaw, Poland. Click Here to Read More »»

Open Wide: 10 Jaw-Dropping Dental Office Concepts

Can't handle the tooth? These 10 jaw-droppingly innovative dental office design concepts help put patients at ease when it's time for the big freeze. Click Here to Read More »»
Share on Facebook [ By WebUrbanist in Architecture & Houses & Residential. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]

30 Jan 09:54

Awesome 3D color prints from Nervous System

by blog@shapeways.com (Natalia)

Jessica of Nervous System has been busy experimenting with full color 3D printing. It's a bold new move for the design duo, who usually design in nylon and metals. Each print is 4 to 6 inches, the meshes are generated by Processing and 3D-printed by Shapeways. She must have been inspired by her coral-filled fish tank because these gorgeous "Colony" prints remind me of diving in the Caribbean. More eye candy on her Flickr set!

nervous system shapeways colony

nervous system shapeways

nervous system colony


28 Jan 23:43

Just Move It

by admin

MountMitte

The parkour movement is becoming a design program in its own right, which has some architects—and everybody’s waistlines—rejoicing.

About one-third of youths and two-thirds of adults in America are overweight or obese. Although we have attributed our bulging waistlines to many factors, such as diet and genetics, the designed environment rarely receives the finger pointing. Our automobile-dependent suburbs and sedentary learning and work environments help us average more than 20 hours per day indoors. Designers have an opportunity—if not a responsibility—to encourage healthier lifestyles.

One solution may be found in the worldwide parkour, or “freestyle,” movement. Founded in the 1920s and further developed by French athlete David Belle in the 1980s and ’90s, parkour regards buildings and urban environments as playgrounds and obstacle courses to be traversed in the most efficient manner possible. Acrobatics are often involved, but equipment is not; even shoes may be considered excessive.

Architecturally, parkour defies established mores about recreational spaces. Although the sport has dangerous elements, the fitness opportunities it proffers and its tangible connection to architecture deserve attention.

Read more of Blaine Brownell’s article “Just Move It” in Architect magazine.

28 Jan 18:30

Laser cut details

by Sam

The Laser Cutter Roundup — a weekly dose of laser-cut love: #110

Hey, Sam here collecting the post from The Laser Cutter.

Make sure you join  TLC’s Facebook page.

Also I just launched my new site called The Deep Channels – it has nothing to do with laser cutting, but you may like it. We have a Facebook page for that too.

Above are 118 layers of  Laser cut paper making up this work from Eric Stanley inspired by stained glass windows.

After the jump, guns, puzzles, an armoir, a lion, souvenirs from Slovakia, and Baroque panels…

Laser cut neon acrylic Flintlock gun from BrickArms.

Laser cut puzzle Alphonse Mucha’s Cycles Perfecta poster from Liberty Puzzles via dajavous.

Red Armoir with laser cut door from Mortise & Tenon.

Super cute laser cut and etched Lion Brooch from Megan Baehr of Nonesuch Garden.

Laser cut and etched wood magnets designed by aimzsta.

Oil paintings on laser cut panels from Redd Walitzki.

Posted in Ponoko News by Sam | Comments are off for this post

28 Jan 03:23

Clean and elegant DeltaMaker personal 3D printer

DeltaMaker is a clean looking personal 3D printer built on a delta robot platform. It has a rigid aluminum extrusion construction. The delta robot was invented by a team led by Reymond Clavel in the early 1980's. Because of the speed and precision with which delta robots can operate, the technology proved a significant success, powering industrial machines of all kinds.
26 Jan 06:19

Tereza (banda) - Sandau (Clipe Oficial) (by bandatereza), via...



Tereza (banda) - Sandau (Clipe Oficial) (by bandatereza), via @tomaspinheiro

26 Jan 05:45

NYC Announces Micro-Apartment Design Comp Winner

my-micro-ny-01.jpg

The NYC Mayor's Office has just announced the winner of the adAPT NYC design competition, which sought designs for liveable micro-apartments. nARCHITECTS' "My Micro NY" design, which specifies modular units from 250 to 370 square feet, has beaten out 33 other submissions to take the top prize. A building assembled from 55 of these units will be erected in Manhattan at an unspecified date in the future, and when it does, it will be Manhattan's first multiunit modular building.

my-micro-ny-02.jpg

While no project page for the "MY Micro NY" design was available at press time, the apartment plans will go on exhibit tomorrow as part of the Museum of the City of New York's "Making Room: New Models for Housing New Yorkers" exhibit.

my-micro-ny-03.jpg

(more...)
26 Jan 05:44

James McNabb's "Sketching with a Band Saw"

james-mcnabb-01.jpg

Philadelphia-based James McNabb, who runs furniture design/build studio McNabb & Co., doesn't let wood cut-offs go to waste; instead he goes at them with the bandsaw. The resultant forms, produced from the process he calls "sketching with a band saw," resemble buildings:

james-mcnabb-02.jpg

Thus was born McNabb's City Series...

...a collection of wood sculptures that represent a woodworker's journey from the suburbs to the city. Each piece depicts the outsider's perspective of the urban landscape. Made entirely of scrap wood, this work is an interpretation of making something out of nothing. Each piece is cut intuitively on a band saw. The result is a collection of architectural forms, each distinctly different from the next.

james-mcnabb-03.jpg

james-mcnabb-04.jpg

(more...)