Yingzhi Jin

Thermal artefacts in two-photon solar cell experiments

Thermal artefacts in two-photon solar cell experiments, Published online: 27 February 2019; doi:10.1038/s41467-018-07166-1

Through the rational molecular design of fluorination, the work function of the conjugated polymer (CP) is enhanced from 4.83 to 5.00 eV. Consequently, the CP can be used to modify efficient active layers consisting of polymer donors with a deep HOMO level, such as PBDB‐T‐2F:IT‐4F, and an outstanding power conversion efficiency of 12.7% is achieved in the corresponding device without V _oc loss.

Abstract

Since the highest occupied molecular orbital (HOMO) level of donors in organic solar cells (OSCs) is being constantly downshifted for achieving high open‐circuit voltage (V _oc), a further enhancement of the anode work function (WF) is required. Herein, an effective approach of fluorination is demonstrated to simultaneously improve the WF and transparency for anode interlayer (AIL) material. By fluorination, in combination with the dialysis treatment in LiCl solution, the WF of PCP‐2F‐Li could be significantly enhanced from 4.86 to 5.0 eV, as compared to PCP‐Na. Meanwhile, the transparency of the polymer is also improved. As a result, PCP‐2F‐Li can be used to modify efficient active layers consisting of polymer donors with deep HOMO levels, such as PBDB‐T‐2F:IT‐4F, and an outstanding power conversion efficiency (PCE) of 12.7% is achieved in the corresponding device with a high V _oc of 0.84 V. This result represents the highest efficiency for the OSCs using a solution‐processed pH‐neutral AIL, which is beneficial to the low‐cost fabrication of high‐performance OSCs with improved stability. More importantly, PCP‐2F‐Li could be processed by blade coating for making large‐area device of 1 cm², and a PCE of 10.6% is achieved, bringing a promising prospect for the large‐area device fabrication.

The difference in the surface energy of the donor and acceptor is the origin to determine the sensitivity of bulk heterojunction morphology to the thickness of a photoactive layer. By delicately controlling the surface energy of nonfullerene acceptors via side chain engineering, thickness‐insensitive organic photovoltaics are demonstrated using a doctor blade technique under air without using any additives.

Abstract

Although high power conversion efficiency of over 14% has been achieved using nonfullerene acceptors (NFAs) in organic photovoltaics (OPVs), securing their insensitive device performance to the thickness of the photoactive layer remains an indispensable requirement for their successful commercialization via printing technologies. In this study, by synthesizing a new series of ITIC‐based NFAs having alkyl or alkoxy groups, it is found that the bulk heterojunction morphology dependence on the thickness of the photoactive layer becomes more severe as the difference in the surface energy of the donor and acceptor increases. It is believed that this observation is the origin that yields the device performance dependence on the thickness of the photoactive layer. Through sensitive control of the surface energy of these ITIC‐based NFAs, it is demonstrated that thickness‐insensitive OPVs can be achieved even using a doctor blade technique under air without using any additives. It is believed that present approach provides an important insight into the design of photoactive materials and morphology control for the printable OPVs using NFAs.

Nonfullerene acceptors (NFAs) provide an exciting prospect for organic solar cells; however, their stability still lacks fundamental understanding. The promising high‐efficiency NFAs, IDTBR and IDFBR, show a three‐phase degradation mechanism, which involves a strong initial molecular conformational change prior to photodegradation under light and oxygen stress, indicating the important role of NFA molecular structure in solar cell stability.

Abstract

Nonfullerene acceptors (NFAs) dominate organic photovoltaic (OPV) research due to their promising efficiencies and stabilities. However, there is very little investigation into the molecular processes of degradation, which is critical to guiding design of novel NFAs for long‐lived, commercially viable OPVs. Here, the important role of molecular structure and conformation in NFA photostability in air is investigated by comparing structurally similar but conformationally different promising NFAs: planar O‐IDTBR and nonplanar O‐IDFBR. A three‐phase degradation process is identified: i) initial photoinduced conformational change (i.e., torsion about the core–benzothiadiazole dihedral), induced by noncovalent interactions with environmental molecules, ii) followed by photo‐oxidation and fragmentation, leading to chromophore bleaching and degradation product formation, and iii) finally complete chromophore bleaching. Initial conformational change is a critical prerequisite for further degradation, providing fundamental understanding of the relative stability of IDTBR and IDFBR, where the already twisted IDFBR is more prone to degradation. When blended with the donor polymer poly(3‐hexylthiophene), both NFAs exhibit improved photostability while the photostability of the polymer itself is significantly reduced by the more miscible twisted NFA. The findings elucidate the important role of NFA molecular structure in photostability of OPV systems, and provide vital insights into molecular design rules for intrinsically photostable NFAs.

Organic solar cells achieve over 15% efficiency through the use of a copolymer donor, and simultaneously enhanced open‐circuit voltage and short‐circuit current density are obtained. High‐performance solar cells are adaptable for environment‐friendly solvents using a blade‐coating method, while showing better photostability than the corresponding ternary solar cells.

Abstract

Ternary blending and copolymerization strategies have proven advantageous in boosting the photovoltaic performance of organic solar cells. Here, 15% efficiency solar cells using copolymerization donors are demonstrated, where the electron‐withdrawing unit, ester‐substituted thiophene, is incorporated into a PBDB‐TF polymer to downshift the molecular energy and broaden the absorption. Copolymer‐based solar cells suitable for large‐area devices can be fabricated by a blade‐coating method from a nonhalogen and nonaromatic solvent mixture. Although ternary solar cells can achieve comparable efficiencies, they are not suitable for environment‐friendly processing conditions and show relatively low photostability compared to copolymer‐based devices. These results not only demonstrate high‐efficiency organic photovoltaic cells via copolymerization strategies but also provide important insights into their applications in practical production.

In organic solar cells, energetic disorder has a major impact on the charge‐recombination rates and thus on open‐circuit voltage losses. In poly‐3‐hexyl‐thiophene (P3HT):[6,6]‐phenyl‐C61‐butyric‐acid methyl ester amorphous heterojunctions, the torsional flexibility of the P3HT backbones is seen as the main origin of the large dynamic and static disorders impacting both charge‐transfer and transport states.

Abstract

Molecular dynamics simulations are combined with density functional theory calculations to evaluate the impact of static and dynamic disorders on the energy distribution of charge‐transfer (CT) states at donor–acceptor heterojunctions, such as those found in the active layers of organic solar cells. It is shown that each of these two disorder components can be partitioned into contributions related to the energetic disorder of the transport states and to the disorder associated with the hole–electron electrostatic interaction energies. The methodology is applied to evaluate the energy distributions of the CT states in representative bulk heterojunctions based on poly‐3‐hexyl‐thiophene and phenyl‐C₆₁‐butyric‐acid methyl ester. The results indicate that the torsional fluctuations of the polymer backbones are the main source of both static and dynamic disorders for the CT states as well as for the transport levels. The impact of static and dynamic disorders on radiative and nonradiative geminate recombination processes is also discussed.

Ring fusion and backbone fluorination yield a novel ladder‐type building block f‐FBTI2, a desirable “stronger acceptor” for enabling n‐type electron‐acceptor polymers. The resulting polymer semiconductor f‐FBTI2‐T shows an excellent power conversion efficiency of 8.1% with a very small energy loss of 0.53 eV in all‐polymer solar cell devices.

Abstract

A novel imide‐functionalized arene, di(fluorothienyl)thienothiophene diimide (f‐FBTI2), featuring a fused backbone functionalized with electron‐withdrawing F atoms, is designed, and the synthetic challenges associated with highly electron‐deficient fluorinated imide are overcome. The incorporation of f‐FBTI2 into polymer affords a high‐performance n‐type semiconductor f‐FBTI2‐T, which shows a reduced bandgap and lower‐lying lowest unoccupied molecular orbital (LUMO) energy level than the polymer analog without F or with F‐functionalization on the donor moiety. These optoelectronic properties reflect the distinctive advantages of fluorination of electron‐deficient acceptors, yielding “stronger acceptors,” which are desirable for n‐type polymers. When used as a polymer acceptor in all‐polymer solar cells, an excellent power conversion efficiency of 8.1% is achieved without any solvent additive or thermal treatment, which is the highest value reported for all‐polymer solar cells except well‐studied naphthalene diimide and perylene diimide‐based n‐type polymers. In addition, the solar cells show an energy loss of 0.53 eV, the smallest value reported to date for all‐polymer solar cells with efficiency > 8%. These results demonstrate that fluorination of imide‐functionalized arenes offers an effective approach for developing new electron‐deficient building blocks with improved optoelectronic properties, and the emergence of f‐FBTI2 will change the scenario in terms of developing n‐type polymers for high‐performance all‐polymer solar cells.

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors

Simplified synthetic routes for low cost and high photovoltaic performance <i>n</i>-type organic semiconductor acceptors, Published online: 31 January 2019; doi:10.1038/s41467-019-08508-3

In article number 1803438 by Hin‐Lap Yip and co‐workers, spectral engineering and ternary blend approaches are employed to demonstrate an efficient semitransparent polymer solar cell (ST‐PSC) tailored for greenhouse photovoltaic applications. The ST‐PSC transmits mainly blue and red light, which are important for photosynthesis in plants. Such optimal sunlight harvesting for both photovoltaic and photosynthesis will be beneficial for future self‐powered greenhouse applications.

By using the new electron‐rich heptacyclic anthracene(cyclopentadithiophene) (AT) core, together with energy level modulations by end‐group optimizations enabling the match with polymer donors, two new nonfullerene small molecule acceptors AT‐NC and AT‐4Cl are synthesized. With both halogenated donor and acceptor, the organic photovoltaics device based on AT‐4Cl achieves a high power conversion efficiency of 13.27% with simultaneously improved J _sc and fill factor.

Abstract

Two new nonfullerene small molecule acceptors (NF‐SMAs) AT‐NC and AT‐4Cl based on heptacyclic anthracene(cyclopentadithiophene) (AT) core and different electron‐withdrawing end groups are designed and synthesized. Although the two new acceptor molecules use two different end groups, naphthyl‐fused indanone (NINCN) and chlorinated INCN (INCN‐2Cl) demonstrate similar light absorption. AT‐4Cl with chlorinated INCN as end groups are shifted significantly due to the strong electron‐withdrawing ability of chlorine atoms. Thus, desirable V _oc and photovoltaic performance are expected to be achieved when polymer PBDB‐T is used as the electron donor with AT‐NC as the acceptor, and fluorinated analog PBDB‐TF with down‐shifted energy levels is selected to blend with AT‐4Cl. Consequently, the device based on PBDB‐TF:AT‐4Cl yields a high power conversion efficiency of 13.27% with a slightly lower V _oc of 0.901 V, significantly enhanced J _sc of 19.52 mA cm⁻² and fill factor of 75.5% relative to the values based on PBDB‐T:AT‐NC. These results demonstrate that the use of a new electron‐rich AT core, together with energy levels modulations by end‐group optimizations enabling the match with polymer donors, is a successful strategy to construct high‐performance NF‐SMAs.

A new asymmetric, terminally tetrafluorinated nonfullerene acceptor, namely ITIF, was prepared for ternary solar cells based on PBDB‐T:ITIF:ITIC blends. Owning to the unique structure, ITIF is promised to work efficiently in ternary blends, simultaneously boosting the devices performance para‐meters. Therefore, the power conversion efficiencies of the ternary solar cells are boosted from 9.2% to 10.5%.

Abstract

Fabricating ternary solar cells is a pivotal strategy to improve the power conversion efficiencies (PCEs) of organic photovoltaic devices. However, it is still a challenge to simultaneously improve the performance parameters of ternary devices. Therefore, the third ingredient in ternary blends should be precisely designed or selected. Herein, a new medium‐bandgap small‐molecule acceptor, namely, 3,9‐bis(2‐methylene‐(3‐(1‐(3,5‐dimethylphenyl)‐1cyanomethylene)indanone))‐5,5,11,11‐tetrakis‐(4‐hexylphenyl)dithieno[2,3‐d:2′,3′‐d′]‐sindaceno[1,2‐b:5,6‐b′]dithiophene (ITIF), is synthesized by end‐capping with a new fluorinated, asymmetric terminal group, (Z)‐2‐(3,5‐difluorophenyl)‐2‐(3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene) acetonitrile. Replacing the CN substituent with the asymmetric 3,5‐difluorophenyl substituent obviously up‐shifts the lowest unoccupied molecular orbital (LUMO) level of ITIF to −3.78 eV, enlarges the bandgap to 1.82 eV, and improves the absorption coefficient to ≈50% higher than that of 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)indanone))‐5,5,11,11‐tetrakis‐(4‐hexylphenyl)dithieno[2,3‐d:2′,3′‐d′]‐sindaceno[1,2‐b:5,6‐b′]dithiophene (ITIC). Due to the similar structures, ITIF and ITIC can combine as an alloyed acceptor, which makes it convenient to tune the morphology and optical and electrochemical properties of ternary blends. The enhanced absorption coefficient of ITIF and the rapid fluorescence resonance energy transfer from ITIF to ITIC remarkably improve the absorption of the ternary blend film, hence compensating for the external quantum efficiency (EQE) curves. When ITIF is introduced into ternary solar cells based on poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione)] (PBDB‐T):ITIF:ITIC blends, the PCEs of the ternary devices are increased from 9.2% to 10.5%, and the short‐circuit currents, open‐circuit voltages, and fill factors are simultaneously improved.

In contrast to conjugated donaor–acceptor (D–A) alternating copolymers, incorporating a third component, either D′‐ or A′‐unit, to their D–A type polymer backbones can improve their light absorption, and tune energy levels and interchain packing synergistically. Moreover, the well‐controlled stoichiometry for these components in terpolymers also provides further access to fine‐tune these factors, thus resulting in high photovoltaic performance in polymer solar cells.

Abstract

The development of conjugated alternating donor–acceptor (D–A) copolymers with various electron‐rich and electron‐deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D–A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D′ unit or an A′ moiety, to the parent D–A type polymer backbones to afford conjugated D–A terpolymers, it will give a facile and cost‐effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine‐tuning these factors, thus resulting in high‐performance PSCs. Herein, based on their unique features, the recent progress of conjugated D–A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high‐efficiency PSCs.

An effective but simple approach to rationally tune the crystallinity and miscibility of small molecular acceptors is reported. With a phenyl introduced at the tail of alkyl side chains, the morphology and molecular orientations of heterojunction are greatly improved. Outstanding efficiencies of 13.23% and 14.04% are detected from the as‐cast and annealed devices, promoted by the fairly high fill factors.

Abstract

Research on fused‐ring small‐molecular‐acceptors (SMAs) has deeply advanced the development of organic solar cells (OSCs). Compared to fruitful studies of ladder‐type cores and end‐caps of SMAs, the exploration of side chains is monotonous. The widely utilized alkyl and aryl side chains usually produce a conflicting association between SMAs' crystallinity and miscibility. Herein, a fresh idea about the modification of side chains is reported to explore the subtle balance between the crystallinity and miscibility. Specifically, a phenyl is introduced to the tail of the alkyl side chain whereby a new acceptor IDIC‐C4Ph is reported. Moderately weakened crystallinity is observed, while maintaining preferred absorption profiles and face‐on orientations. Concurrently, remarkably improved heterojunction morphologies and stacking orientations are detected. PBDB‐T:IDIC‐C4Ph devices exhibit greater efficiency of 11.50% than devices from alky and aryl modified acceptors. Notably, the as‐cast OSCs of PBDB‐TF:IDIC‐C4Ph reveal outstanding FF over 76% with the best efficiency up to 13.23%. The annealed devices reveal further increased efficiency exceeding 14% with the state of the art FF of 78.32%. Overall, an effective but easily navigable approach is demonstrated to modulate the crystallinity of SMAs toward synergistically improved morphologies and molecular orientations of bulk heterojunction enabling highly efficient OSCs.

Nonfullerene‐based small‐molecule organic solar cells with a new record efficiency of 12.08% are achieved by first incorporation of near‐infrared absorbing molecules and by tuning the sequentially evolved crystalline morphology. The improved crystallinity of both donor and acceptor materials facilitates the formation of multilength scale morphologies, which further enhance charge mobility and extraction, and reduce the nongeminate recombination.

Abstract

In this paper, two near‐infrared absorbing molecules are successfully incorporated into nonfullerene‐based small‐molecule organic solar cells (NFSM‐OSCs) to achieve a very high power conversion efficiency (PCE) of 12.08%. This is achieved by tuning the sequentially evolved crystalline morphology through combined solvent additive and solvent vapor annealing, which mainly work on ZnP‐TBO and 6TIC, respectively. It not only helps improve the crystallinity of the ZnP‐TBO and 6TIC blend, but also forms multilength scale morphology to enhance charge mobility and charge extraction. Moreover, it simultaneously reduces the nongeminate recombination by effective charge delocalization. The resultant device performance shows remarkably enhanced fill factor and J _sc. These result in a very respectable PCE, which is the highest among all NFSM‐OSCs and all small‐molecule binary solar cells reported so far.

An in situ back‐contact passivation strategy is adopted to optimize the photovoltaic performance of n–i–p planar perovskite solar cells. Devices with a flat‐band alignment between the perovskite and polymer passivation layer achieve a high photovoltage of 1.15 V and fill factor of 83% with 1.53 eV bandgap perovskite, leading to a stabilized power conversion efficiency of 21.6%.

Abstract

Organic–inorganic hybrid perovskite solar cells (PSCs) have seen a rapid rise in power conversion efficiencies in recent years; however, they still suffer from interfacial recombination and charge extraction losses at interfaces between the perovskite absorber and the charge–transport layers. Here, in situ back‐contact passivation (BCP) that reduces interfacial and extraction losses between the perovskite absorber and the hole transport layer (HTL) is reported. A thin layer of nondoped semiconducting polymer at the perovskite/HTL interface is introduced and it is shown that the use of the semiconductor polymer permits—in contrast with previously studied insulator‐based passivants—the use of a relatively thick passivating layer. It is shown that a flat‐band alignment between the perovskite and polymer passivation layers achieves a high photovoltage and fill factor: the resultant BCP enables a photovoltage of 1.15 V and a fill factor of 83% in 1.53 eV bandgap PSCs, leading to an efficiency of 21.6% in planar solar cells.