Yingzhi Jin

A highly crystalline acceptor (4TIC) was used as the additional non-fullerene acceptor to construct ternary small-molecule organic solar cells. The addition of 4TIC not only significantly enhances the crystallinity of the blend film but also maintains the desired face-on orientation in the proper multi-length scale morphology to improve both charge extraction and recombination in devices. The ternary devices showed a remarkably enhanced short-circuit current density and fill factor, resulting in a high power conversion efficiency of 15.88%.

Nature Energy, Published online: 02 November 2020; doi:10.1038/s41560-020-00716-2

Lead leakage from damaged perovskite photovoltaic modules poses health and environmental risks limiting the potential use of the technology. Now Chen et al. show that the encapsulation of perovskite modules with a cation-exchange resins reduces lead leakage to 14.3 ppb in waste water.

The self‐assembled monolayer (SAM) has emerged as a powerful nanomaterial for improving performance of perovskite solar cells (PSCs). This review article covers recent studies that demonstrate direct benefits of SAM‐based interfacial engineering on the mechanistic understanding of the electronic functions of PSCs and their power conversion efficiency.

Abstract

Self‐assembled monolayers (SAMs), owing to their unique and versatile abilities to manipulate chemical and physical interfacial properties, have emerged as powerful nanomaterials for improving the performance of perovskite solar cells (PSCs). Indeed, in the last six years, a collection of studies has shown that the application of SAMs to PSCs boosts the performance of devices compared to the pristine PSCs. This review describes recent studies that demonstrate the direct advantages of SAM‐based interfacial engineering to power conversion efficiency (PCE) of PSCs. This review includes 1) a brief introduction on SAMs as interfacial engineering nanomaterials; 2) a thorough survey of molecules used in SAM‐engineered PSCs and analysis of chemical structures; 3) an extensive discussion on how SAMs affect the morphology of perovskite film and the electronic function of devices; and 4) a comprehensive summary of various types of approaches for producing SAM‐engineered PSCs. This review provides an insightful perspective to stimulate new ideas and innovation in the development of PSCs for the next‐generation photovoltaics and beyond.

Three isomeric small‐molecule acceptors (SMAs) are developed by altering the substitution site of Cl and Br on the benzene‐fused end group, namely, BTP‐ClBr, BTP‐ClBr1, and BTP‐ClBr2, and the effects of substitution position in the SMAs on the photoelectric properties and photovoltaic performance are systematically investigated.

Abstract

It is widely recognized that subtle changes in the chemical structure of organic semiconductors can induce dramatic variations in their optoelectronic properties and device performance, especially for the nonfullerene small‐molecule acceptors (SMAs). For instance, halogenation of the end groups in the acceptor–donor–acceptor‐type SMAs is an effective strategy to modulate the properties of the end group and thus the entire SMA. While previous position modulations have focused on only one substituent, this study shows the development of three isomeric SMAs (BTP‐ClBr, BTP‐ClBr1, and BTP‐ClBr2) via manipulating the position of two halogen substituents (chlorine and bromine) on the terminal unit. BTP‐ClBr exhibits a blueshifted absorption, a shallower lowest unoccupied molecular orbital energy level, and a weaker crystallization tendency relative to BTP‐ClBr1 and BTP‐ClBr2. A power conversion efficiency (16.82%) and an excellent fill factor (FF) (0.79) are realized in the optimal PM6:BTP‐ClBr organic solar cell device. The higher FF is consistent with the results of the characterization including a longer charge recombination lifetime, a faster photocurrent decay, a weaker bimolecular recombination, and a more favorable domain size for PM6:BTP‐ClBr, which all originate from a subtle change in the substitution sites that strongly influences the physicochemical properties of the SMA.

Herein the morphology and exciton/charge carrier dynamics in bulk heterojunctions of the donor polymer PTQ10 and molecular acceptor IDIC are investigated. The results emphasize the potential for high material crystallinity to enhance charge separation and collection in organic solar cells, but also that long exciton diffusion lengths are likely to be essential for efficient exciton separation in such high crystallinity devices.

Abstract

Herein the morphology and exciton/charge carrier dynamics in bulk heterojunctions (BHJs) of the donor polymer PTQ10 and molecular acceptor IDIC are investigated. PTQ10:IDIC BHJs are shown to be particularly promising for low cost organic solar cells (OSCs). It is found that both PTQ10 and IDIC show remarkably high crystallinity in optimized BHJs, with GIWAXS data indicating pi‐pi stacking coherence lengths of up to 8 nm. Exciton‐exciton annihilation studies indicate long exciton diffusion lengths for both neat materials (19 nm for PTQ10 and 9.5 nm for IDIC), enabling efficient exciton separation with half lives of 1 and 3 ps, despite the high degree of phase segregation in this blend. Transient absorption data indicate exciton separation leads to the formation of two spectrally distinct species, assigned to interfacial charge transfer (CT) states and separated charges. CT state decay is correlated with the appearance of additional separate charges, indicating relatively efficient CT state dissociation, attributed to the high crystallinity of this blend. The results emphasize the potential for high material crystallinity to enhance charge separation and collection in OSCs, but also that long exciton diffusion lengths are likely to be essential for efficient exciton separation in such high crystallinity devices.

The recent progress in potentially low‐cost polythiophene:nonfullerene‐based solar cells is reviewed from the viewpoints of molecular engineering and morphology control. The molecular design strategies of polythiophenes and nonfullerene acceptors are discussed, followed by the recent achievements in understanding and controlling the morphology of polythiophene:nonfullerene blends. Finally, the future challenges are delineated for advancing the commercial applications of polythiophenes in solar cells.

Abstract

With the advances in organic photovoltaics (OPVs), the development of low‐cost and easily accessible polymer donors is of vital importance for OPV commercialization. Polythiophene (PT) and its derivatives stand out as the most promising members of the photovoltaic material family for commercial applications, owing to their low cost and high scalability of synthesis. In recent years, PTs, paired with nonfullerene acceptors, have progressed rapidly in photovoltaic performance. This Review gives an overview of the strategies in designing PTs for nonfullerene OPVs from the perspective of energy level modulation. A survey of the typical classes of nonfullerene acceptors designed for pairing with the benchmark PT, i.e., poly(3‐hexylthiophene) (P3HT) is also presented. Furthermore, recent achievements in understanding and controlling the film morphology for PT:nonfullerene blends are discussed in depth. In addition to the effects of molecular weight and blend ratio on film morphology, the crucial roles of miscibility between PT and nonfullerene and processing solvent in determining film microstructure and morphology are highlighted, followed by a discussion on thermal annealing and ternary active layers. Finally, the remaining questions and the prospects of the low‐cost PT:nonfullerene systems are outlined. It is hoped that this review can guide the optimization of PT:nonfullerene blends and advance their commercial applications.

A comparative study is reported on the Brønsted acid and Lewis acid doping of poly(3‐hexylthiophene) with a largely soluble molecular dopant, tris(pentafluorophenyl)borane. The Brønsted acid doping enables the formation of unconventional type II polymorph of the polymer, thereby leading to drastic increases in electrical and thermoelectric properties and excellent air stabilities via simple one‐step solution mixing.

Abstract

Molecular doping is essential for improving the thermoelectric properties of conjugated polymers, but dopants of low solubility either restrict the formation of high quality films or complicate fabrication steps. Although a highly soluble molecular dopant, tris(pentafluorophenyl)borane (BCF), has been sporadically studied, its potential has not yet been fully explored. Herein, particularly intriguing effects of Brønsted acid doping with BCF‐water complexes for poly(3‐hexylthiophene) (P3HT) are reported, which can facilitate substantial increases in electrical and thermoelectric properties with remarkable doping stabilities. Interestingly, a unique polymorph of P3HT with interdigitated alkyl chains (called type II) is observed in the Brønsted acid doping with BCF‐water complexes. Moreover, the doped P3HT shows conformational change to the quinoid structure, enabling increased backbone planarity. As a result, the Brønsted acid‐doped P3HT films exhibit outstanding electrical conductivities, thermoelectric power factors, and figure‐of‐merit of up to 33.0 S cm⁻¹, 28.3 µW m⁻¹ K⁻², and 0.034, respectively. These values are at least an order of magnitude higher than those of P3HT films doped with a conventional molecular dopant, 7,7,8,8‐tetracyano‐2,3,5,6‐tetrafluoroquinodimethane. The Brønsted acid doping with BCF‐water complexes also affords excellent air stabilities of P3HT films, which potentially provides a strong comparative advantage over existing highly reactive salt‐type dopants, such as FeCl₃.

In article number https://doi.org/10.1002/aenm.2020014432001443 Krzysztof Winkler and co‐workers focus on the formation, structure and properties of fullerene‐based electroactive polymeric materials. These materials exhibit electrochemical activity in the negative potential range due to the reduction of the fullerene moiety in coordination polymers of fullerene and palladium. Applications of these materials in charge storage devices are also highlighted.

Herein, novel Ruddlesden–Popper Cs₂PbI₂Cl₂ nanosheets are synthesized and creatively employed as a multifunctional interface optimization material to improve the performance of CsPbI₂Br solar cells. Based on the heterostructured NSs/CsPbI₂Br/NSs inorganic film, an efficiency of 16.65% is obtained, which is one of the best reported for CsPbI₂Br solar cells, along with much‐enhanced UV, air, and thermal stabilities.

Abstract

Inorganic CsPbI₂Br perovskite solar cells (PSCs) have gained enormous research interest due to their excellent thermal and light stabilities. However, their unsatisfactory power‐conversion efficiency and poor intrinsic phase stability remain roadblocks to their further development. Herein, Cs₂PbI₂Cl₂ nanosheets (NSs) with the Ruddlesden–Popper (RP) structure are synthesized, and an NSs/CsPbI₂Br/NSs heterostructure is employed to enhance both the stability and efficiency of CsPbI₂Br solar cells. The novel Cs₂PbI₂Cl₂ NSs can not only passivate the top and bottom surfaces of the perovskite film and top surface of the TiO₂ film but also enhance the stability of the perovskite film. Based on the heterostructured NSs/CsPbI₂Br/NSs inorganic perovskite film, the efficiency of the CsPbI₂Br PSCs is improved from 15.02% to 16.65%. Moreover, the unencapsulated CsPbI₂Br devices with the NSs/CsPbI₂Br/NSs heterostructure sustain over 90% of their original efficiencies after being exposed to ambient conditions (≈25 °C and ≈35% RH) for 648 h. Both the UV‐light‐soaking stability (100 mW cm⁻¹ 365 nm UV light) and thermal stability (T = 85 °C) of the optimized devices are dramatically improved in comparison with their counterparts with only a 3D active layer. Therefore, this work promotes the application of RP inorganic perovskite nanocrystals in a range of perovskite optoelectronic devices.

Nonfullerene acceptors offer new opportunities for high efficiencies in organic solar cells, but the suppression of photodegradation of the materials in the presence of dioxygen is essential. The complex behavior of the reactive oxygen species superoxide and singlet oxygen in the degradation of the donor polymer poly(3‐hexylthiophene), the small molecule acceptor 5,5′‐[(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(2,1,3‐benzothiadiazole‐7,4‐diylmethylidyne)]bis[3‐ethyl‐2‐thioxo‐4‐thiazolidinone], and their blends is unraveled in detail.

Abstract

With rapid advances in material synthesis and device performance, the long‐term stability of organic solar cells has become the main remaining challenge toward commercialization. An investigation of photodegradation in blend films of the donor polymer poly(3‐hexylthiophene) (P3HT) and the rhodanine‐flanked small molecule acceptor 5,5′‐[(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(2,1,3‐benzothiadiazole‐7,4‐diylmethylidyne)]bis[3‐ethyl‐2‐thioxo‐4‐thiazolidinone] (FBR) is presented in an ambient atmosphere. The photobleaching kinetics of the pure materials and their blends is correlated with the generation of radicals and triplet excitons using optical and magnetic resonance techniques. In addition, spin‐trapping methods are employed to identify reactive oxygen species (ROS). In films of P3HT, FBR, and the P3HT:FBR blend, superoxide is generated by electron transfer to molecular oxygen. However, it is found that the generation of singlet oxygen by energy transfer from the FBR triplet state is responsible for the poor stability of FBR and for the accelerated photodegradation at later times of the P3HT:FBR blend. In the early stage of degradation of the neat blend, it is protected from singlet oxygen by the fast donor–acceptor charge transfer, which competes with triplet exciton formation. These results provide initial input for a rational design of donor and acceptor materials through tuning the molecular singlet and triplet energy levels to prevent ROS‐related photodegradation.

A newly conceived n‐type small molecule (Y‐Th2) is incorporated as an efficient additive in perovskite solar cells, achieving simultaneous improvements in device performance and stability. Y‐Th2 effectively passivates defects in perovskite crystals by Lewis acid–base interactions and intermolecular hydrogen bonds, obtaining high‐quality perovskite film. The inverted structure device exhibits a power conversion efficiency of 21.5% with notably enhanced operational stability.

Abstract

Significant efforts have been devoted to modulating the grain size and improving the film quality of perovskite in perovskite solar cells (PSCs). Adding materials to the perovskite is especially promising for high‐performance PSCs, because the additives effectively control the crystal structure. Although the additive engineering approach has substantially boosted the efficiency of PSCs, instability of the perovskite film has remained a primary bottleneck for the commercialization of PSCs. Herein, a newly conceived bithiophene‐based n‐type conjugated small molecule (Y‐Th2) is introduced to PSCs, which simultaneously enhances the performance and stability of the cell. The Y‐Th2 effectively passivates the defect states in perovskite through Lewis acid–base interactions, increasing the grain size and quality of the perovskite absorber. An inverted PSC containing the Y‐Th2 additive achieves a power conversion efficiency of 21.5%, versus 18.3% in the reference device. The operational stability is also considerably enhanced by the improved hydrophobicity and intermolecular hydrogen bonds in the perovskite.

Lead‐free perovskite‐inspired materials (PIMs) provide a particularly attractive route to low‐toxicity indoor photovoltaics (IPV). Two exemplar PIMs, bismuth oxyiodide (BiOI) and Cs₃Sb₂Cl _x I_{9‐ x} , deliver an IPV efficiency of 4–5%, and can power thin‐film‐transistor electronics. Loss analyses and calculations of the optically limited efficiency reveal that further efficiency increases are possible, encouraging future efforts for the exploration of PIMs for powering Internet of Things (IoT) devices.

Abstract

With the exponential rise in the market value and number of devices part of the Internet of Things (IoT), the demand for indoor photovoltaics (IPV) to power autonomous devices is predicted to rapidly increase. Lead‐free perovskite‐inspired materials (PIMs) have recently attracted significant attention in photovoltaics research, due to the similarity of their electronic structure to high‐performance lead‐halide perovskites, but without the same toxicity limitations. However, the capability of PIMs for indoor light harvesting has not yet been considered. Herein, two exemplar PIMs, BiOI and Cs₃Sb₂Cl _x I_{9‐ x} are examined. It is shown that while their bandgaps are too wide for single‐junction solar cells, they are close to the optimum for indoor light harvesting. As a result, while BiOI and Cs₃Sb₂Cl _x I_{9‐ x} devices are only circa 1%‐efficient under 1‐sun illumination, their efficiencies increase to 4–5% under indoor illumination. These efficiencies are within the range of reported values for hydrogenated amorphous silicon, i.e., the industry standard for IPV. It is demonstrated that such performance levels are already sufficient for millimeter‐scale PIM devices to power thin‐film‐transistor circuits. Intensity‐dependent and optical loss analyses show that future improvements in efficiency are possible. Furthermore, calculations of the optically limited efficiency of these and other low‐toxicity PIMs reveal their considerable potential for IPV, thus encouraging future efforts for their exploration for powering IoT devices.

Field‐assisted charge generation upon illumination of neat SubNc sandwiched between charge selective electrodes is shown to be efficient, and results in low voltage losses with high quantum efficiencies. The described effects can play an important role in the current state‐of‐the‐art, high efficiency organic solar cells with low driving force for charge generation.

Abstract

Efficient charge generation in organic semiconductors usually requires an interface with an energetic gradient between an electron donor and an electron acceptor in order to dissociate the photogenerated excitons. However, single‐component organic solar cells based on chloroboron subnaphthalocyanine (SubNc) have been reported to provide considerable photocurrents despite the absence of an energy gradient at the interface with an acceptor. In this work, it is shown that this is not due to direct free carrier generation upon illumination of SubNc, but due to a field‐assisted exciton dissociation mechanism specific to the device configuration. Subsequently, the implications of this effect in bilayer organic solar cells with SubNc as the donor are demonstrated, showing that the external and internal quantum efficiencies in such cells are independent of the donor‐acceptor interface energetics. This previously unexplored mechanism results in efficient photocurrent generation even though the driving force is minimized and the open‐circuit voltage is maximized.

Recent advances in organic photovoltaic (OPV) materials and processing technologies are promising for transitioning of OPV devices from laboratory‐scale to large‐area industrial scale modules. Recent breakthroughs attained by development of nonfullerene acceptors have led to significant enhancement in power conversion efficiency. It is essential to elucidate degradation mechanisms of OPV devices for improving device long‐term stability.

Abstract

Organic solar cells based on bulk heterojunctions (BHJs) are attractive energy‐conversion devices that can generate electricity from absorbed sunlight by dissociating excitons and collecting charge carriers. Recent breakthroughs attained by development of nonfullerene acceptors result in significant enhancement in power conversion efficiency (PCEs) exceeding 17%. However, most of researches have focused on pursuing high efficiency of small‐area (<1 cm²) unit cells fabricated usually with spin coating. For practical application of organic photovoltaics (OPVs) from lab‐scale unit cells to industrial products, it is essential to develop efficient technologies that can extend active area of devices with minimized loss of performance and ensured operational stability. In this progress report, an overview of recent advancements in materials and processing technologies is provided for transitioning from small‐area laboratory‐scale devices to large‐area industrial scale modules. First, development of materials that satisfy requirements of high tolerability in active layer thickness and large‐area adaptability is introduced. Second, morphology control using various coating techniques in a large active area is discussed. Third, the recent research progress is also underlined for understanding mechanisms of OPV degradation and studies for improving device long‐term stability along with reliable evaluation procedures.

The development of the first high‐performance, printable CsPbI₃ solar cells via an ambient blade‐coating technique is reported. High‐quality CsPbI₃ films are grown via the introduction of a low concentration of the multifunctional molecular additive Zn(C₆F₅)₂. As a result, the additive‐treated perovskite solar cell delivers a power conversion efficiency (PCE) of 19%.

Abstract

All‐inorganic CsPbI₃ holds promise for efficient tandem solar cells, but reported fabrication techniques are not transferrable to scalable manufacturing methods. Herein, printable CsPbI₃ solar cells are reported, in which the charge transporting layers and photoactive layer are deposited by fast blade‐coating at a low temperature (≤100 °C) in ambient conditions. High‐quality CsPbI₃ films are grown via introducing a low concentration of the multifunctional molecular additive Zn(C₆F₅)₂, which reconciles the conflict between air‐flow‐assisted fast drying and low‐quality film including energy misalignment and trap formation. Material analysis reveals a preferential accumulation of the additive close to the perovskite/SnO₂ interface and strong chemisorption on the perovskite surface, which leads to the formation of energy gradients and suppressed trap formation within the perovskite film, as well as a 150 meV improvement of the energetic alignment at the perovskite/SnO₂ interface. The combined benefits translate into significant enhancement of the power conversion efficiency to 19% for printable solar cells. The devices without encapsulation degrade only by ≈2% after 700 h in air conditions.

Lessons learned from the historical analysis of diverse solar cells provide a fundamental diagnosis of the relative and absolute development status of perovskite solar cells. The upscaling of perovskite solar cells and commercialization of various solar cells are comparatively analyzed and feasible technologies that can be applied to the perovskite upscaling process, both now and in the future, are suggested.

Abstract

The status and problems of upscaling research on perovskite solar cells, which must be addressed for commercialization efforts to be successful, are investigated. An 804 cm² perovskite solar module has been reported with 17.9% efficiency, which is significantly lower than the champion perovskite solar cell efficiency of 25.2% reported for a 0.09 cm² aperture area. For the realization of upscaling high‐quality perovskite solar cells, the upscaling and development history of conventional silicon, copper indium gallium sulfur/selenide and CdTe solar cells, which are already commercialized with modules of sizes up to ≈25 000 cm², are reviewed. GaAs, organic, dye‐sensitized solar cells and perovskite/silicon tandem solar cells are also reviewed. The similarities of the operating mechanisms between the various solar cells and the origin of different development pathway are investigated, and the ideal upscaling direction of perovskite solar cells is subsequently proposed. It is believed that lessons learned from the historical analysis of various solar cells provide a fundamental diagnosis of relative and absolute development status of perovskite solar cells. The unique perspective proposed here can pave the way toward the upscaling of perovskite solar cells.

The introduction of an intermediate layer to bridge different solar cell technologies, which have become mature for the optimization of single‐junction cells, is a critical technology for fabricating efficient hybrid tandem solar cells. The design and classification of an efficient interconnection layer that leverages the full potential of the hybrid tandems are discussed.

Abstract

Hybrid tandem solar cells offer the benefits of low cost and full solar spectrum utilization. Among the hybrid tandem structures explored to date, the most popular ones have four (simple stacking design) or two (terminal/tunneling layer addition design) terminal electrodes. Although the latter design is more cost‐effective than the former, its widespread application is hindered by the difficulty of preparing an interface between two solar cell materials. The oldest approach to the in‐series bonding of two or more bandgap solar cells relies on the introduction of a tunneling layer in multijunction III–V solar cells, but it has some limitations, e.g., the related materials/technologies are applicable only to III–V and certain other solar cells. Thus, alternative methods of realizing junction contacts based on the use of novel materials are highly sought after. Here, the strategies used to realize high‐performance tandem cells are described, focusing on interface control in terms of bonding two or more solar cells for tandem approaches. The presented information is expected to aid the establishment of ideal methods of connecting two or more solar cells to obtain the highest performance for different solar cell choices with minimized energy loss through the interface.

A sky‐blue‐exciplex‐forming host constructed by π–donor and π–acceptor with bipolar π‐spacers is used to fabricate single‐emissive‐layer all‐fluorescent white organic light‐emitting diodes, leading to stable warm white emission with a record‐high power efficiency of 69.6 lm W⁻¹ and a long T80 (time to 80% of the initial luminance) of >8200 h at 1000 cd m⁻².

Abstract

Exciplex‐forming hosts with thermally activated delayed fluorescence (TADF) provide a viable opportunity to unlock the full potential of the yet‐to‐be improved power efficiencies (PEs) and stabilities of all‐fluorescent white organic light‐emitting diodes (WOLEDs), but this, however, is hindered by the lack of stable blue exciplexes. Here, an advanced exciplex system is proposed by incorporating bipolar charge‐transport π‐spacers into both the electron‐donor (D) and the electron‐accepter (A) to increase their distance for hypsochromic‐shifted emission while maintaining the superior transporting ability. By using spirofluorene as the π‐spacer, 3,3′‐bicarbazole as the D‐unit, and 2,4,6‐triphenyl‐1,3,5‐triazine as the A‐unit, a π–D and π–A exciplex with sky‐blue emission and fast reverse intersystem crossing process is thereof constructed. Combining this exciplex‐forming host, a blue TADF‐sensitizer, and a yellow conventional fluorescent dopant in a single‐emissive‐layer, the fabricated warm‐white‐emissive device simultaneously exhibits a low driving voltage of 3.08 V, an external quantum efficiency of 21.4%, and a remarkable T80 (time to 80% of the initial luminance) of >8200 h at 1000 cd m⁻², accompanied by a new benchmark PE of 69.6 lm W⁻¹ among all‐fluorescent WOLEDs.

The precise composition of the intermixed phase in bulk heterojunction structures with device‐relevant size is determined via the analysis of the glass transition temperatures proven by fast scanning calorimetry. A relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads already to efficient charge generation. However, charge transport can only be sustained in blend morphologies with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%).

Abstract

The relation of phase morphology and solid‐state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase‐pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device‐relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk‐heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology–function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high‐performing systems such as nonfullerene acceptor:polymer bulk heterojunctions.

The photocurrent in a hybrid organic–inorganic perovskite photodetector is modulated via electrical‐poling‐promoted ion migration within perovskite crystals and, in turn, the polarization potential. The electrical poling yields a tenfold increase in the photocurrent and a twofold decrease in response time in a perovskite photodetector.

Abstract

Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical‐poling‐induced ion migration, accounting for many unusual attributes and thus performance in perovskite‐based devices, remain comparatively elusive. Herein, the electrical‐poling‐promoted polarization potential is reported for rendering hybrid organic–inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus‐assisted solution‐printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical‐poling‐induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical‐poling‐triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion‐migration‐produced polarization potential may represent an important endeavor toward a wide range of high‐performance perovskite‐based photodetectors, solar cells, transistors, scintillators, etc.

Smart afterglow rainbow: A facile and efficient strategy is developed to achieve colorful persistent room‐temperature phosphorescence from blue to orange‐red in purely organic amorphous polymers with outstanding film‐forming ability. Moreover, excitation‐dependent and time‐dependent afterglows under ambient conditions are accessed owing to the formation of diversified clustered chromophores. Such exceptional emission behaviors and excellent processability render them promising for advanced technical applications.

Abstract

Achieving persistent room‐temperature phosphorescence (p‐RTP), particularly those of tunable full‐colors, from pure organic amorphous polymers is attractive but challenging. Particularly, those with tunable multicolor p‐RTP in response to excitation wavelength and time are highly important but both fundamentally and technically underexplored. Here, a facile and general strategy toward color‐tunable p‐RTP from blue to orange‐red based on amidation grafting of luminophores onto sodium alginate (SA) chains, resulting in amorphous polymers with distinct p‐RTP and even impressively excitation‐dependent and time‐dependent afterglows is reported. p‐RTP is associated with the unique semi‐rigidified SA chains, effective hydrogen bonding network, and oxygen barrier properties of SA, whereas excitation‐dependent and time‐dependent afterglows should stem from the formation of diversified p‐RTP emissive species with comparable but different lifetimes. These results outline a rational strategy toward amorphous smart luminophores with colorful, excitation‐dependent, and time‐dependent p‐RTP, excellent solution processability, and film‐forming ability for versatile applications.

A thermally activated delayed fluorescence emitter, 2tDMG, is designed and synthesized based on the donor (D)/acceptor (A) spatially intramolecular noncovalent interaction. The D/A units are connected via a rigid linker, thereby confining them into a close‐packed coplanar configuration for small singlet–triplet splitting energy. 2tDMG achieves a high external quantum efficiency of 30.8% with a low efficiency roll‐off in evaporation‐processed organic light‐emitting diodes (OLEDs).

Abstract

In this work, two novel thermally activated delayed fluorescence (TADF) emitters, 2tDMG and 3tDMG, are synthesized for high‐efficiency organic light‐emitting diodes (OLEDs), The two emitters have a tilted face‐to‐face alignment of donor (D)/acceptor (A) units presenting intramolecular noncovalent interactions. The two TADF materials are deposited either by an evaporation‐process or by a solution‐process, both of them leading to high OLED performance. 2tDMG used as the emitter in evaporation‐processed OLEDs achieves a high external quantum efficiency (EQE) of 30.8% with a very flat efficiency roll‐off of 7% at 1000 cd m⁻². The solution‐processed OLEDs also display an interesting EQE of 16.2%. 3tDMG shows improved solubility and solution processability as compared to 2tDMG, and thus a high EQE of 20.2% in solution‐processed OLEDs is recorded. The corresponding evaporation‐processed OLEDs also reach a reasonably high EQE of 26.3%. Encouragingly, this work provides a novel strategy to address the imperious demands for OLEDs with high EQE and low roll‐off.

In organic light‐emitting diodes based on thermally activated delayed fluorescence of donor–acceptor blends, both the magneto‐electroluminescence response and electron magnetic resonance spectrum are found to be independent of the particular hydrogen isotope (protium or deuterium) present. This shows that the reverse intersystem crossing process from the triplet to singlet states occurs in the exciplex manifold rather than that of the polaron pair.

Abstract

The isotope effect is studied in the magneto‐electroluminescence (MEL) and pulsed electrically detected magnetic resonance of organic light‐emitting diodes based on thermally activated delayed fluorescence (TADF) from donor–acceptor exciplexes that are either protonated (H) or deuterated (D). It is found that at ambient temperature, the exchange of H to D has no effect on the spin‐dependent current and MEL responses in the devices. However, at cryogenic temperatures, where the reverse intersystem crossing (RISC) from triplet to singlet exciplex diminishes, a pronounced isotope effect is observed. These results show that the RISC process is not governed by the hyperfine interaction as thought previously, but proceeds through spin‐mixing in the triplet exciplex. The observations are corroborated by electrically detected transient spin nutation experiments that show relatively long dephasing time at ambient temperature, and interpreted in the context of a model that involves exchange and hyperfine interactions in the spin triplet exciplex. These findings deepen the understanding of the RISC process in TADF materials.

Molecular packing and thermodynamic properties of D18‐based fullerene‐free organic solar cells are studied. The D18 polymer exhibits strong chain extension in films, which is beneficial to charge transport. Miscibility and other characterizations explain the disparate performance of three systems and the processing procedures.

Abstract

Organic solar cells (OSCs) based on D18:Y6 have recently exhibited a record power conversion efficiency of over 18%. The initial work is extended and the device performance of D18‐based OSCs is compared with three non‐fullerene acceptors, Y6, IT‐4F, and IEICO‐4Cl, and their molecular packing characteristics and miscibility are studied. The D18 polymer shows unusually strong chain extension and excellent backbone ordering in all films, which likely contributes to the excellent hole‐transporting properties. Thermodynamic characterization indicates a room‐temperature miscibility for D18:Y6 and D18:IT‐4F near the percolation threshold. This corresponds to an ideal quench depth and explains the use of solvent vapor annealing rather than thermal annealing. In contrast, D18:IEICO‐4Cl is a low‐miscibility system with a deep quench depth during casting and poor morphology control and low performance. A failure of ternary blends with PC₇₁BM is likely due to the near‐ideal miscibility of Y6 to begin with and indicates that strategies for developing successful ternary or quaternary solar cells are likely very different for D18 than for other high‐performing donors. This work reveals several unique property–performance relations of D18‐based photovoltaic devices and helps guide design or fabrication of yet higher efficiency OSCs.